Century Hawk Pro Instruction Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
Section 3: Installing servos to servo tray
Insert and attach the lower throttle servo on the left side (3.1) with the output “horn” fac-
ing the front of the servo tray. Install the upper collective servo above the throttle servo
with the output facing the back (3.2). Attach the aileron servo (3.2) to the middle of the
top portion of the servo tray with the horn facing forward. Attach the elevator servo to
the left of the aileron servo horn facing rearward (3.2). Attach the power switch (3.3) to
the switch plate provided on the right hand side of the servo frame. Slide the gyro in
place (3.4). If possible, expose the gyro’s manual controls for future easy adjustment.
Attach the servo frame assembly to the main frame assembly forward section (3.5 - 3.6)
using provided hardware. Attach the rear rudder servo mount to the right hand aft sec-
tion of the upper side frame with the output facing rearward (3.7). Completed section
(3.8) depicted.
3.1
3.2 3.3
3.4
3.5
3.6
3.7
3.8
Section 4: Fuel tank
& fittings
Assemble the fuel stopper (found in
the bag with the upper frames) (4.1)
by bending the longer aluminum tube
(connects to muffler nipple) so it will end
at the top inside the fuel tank. Align the
short straight aluminum tube level to the
engine carburetor fuel intake. Secure
with M3x18 screw supplied in clutch/fan
package and tie wrap (4.2 & 4.3)
4.1
4.2
4.3
Front
install
servos with
M2.5x12
self tapping
screws
Screws for
switch are
provided
with switch
in radio
system
Use thread lock
M3x6 washer
head screws (2)
3x12 self tapping
screws (2)
M3x25 socket head
cap screws (2)
M3 locknut (2)
Fuel fitting set
assembled
6
Short straight tube
(sends fuel to engine)
Long curved
tube (from
muffler nipple)
Aileron servo
Elevator servo
Throttle
servo
Collective
pitch servo
Fuel line
fuel tank
pickup
“clunk”
M3x18 self
tapping screw
Tie wrap
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Comments to this Manuals

No comments